Cleft Laterality Dental Arch Relationship Outcomes for Children with Unilateral Cleft Lip and Palate in New Zealand.

OBJECTIVES: To investigate cleft laterality dental arch relationship outcomes of children with non-syndromic complete unilateral cleft lip and palate (UCLP) in New Zealand. DESIGN: A retrospective nationwide study. SETTINGS: Virtual 3D orthodontic study models collected prior to undertaking secondary alveolar bone grafting. PARTICIPANTS: A total of 104 patients with UCLP (L = 80: R = 24). OUTCOME MEASURES: Four calibrated assessors used the GOSLON Yardstick and 100 mm Visual Analogue Scale (VAS) to score the randomised models on 2 separate assessment sessions. Weighted Kappa were used to determine the intra/inter-rater reliability for the GOSLON and correlations for the VAS. RESULTS: Intra-rater reliability ranged from 0.57-0.88 (GOSLON) and 0.45-0.93 (VAS). Inter-rater reliability ranged from 0.62-0.86 (GOSLON) and 0.64-0.93 (VAS).GOSLON scores for the left UCLP were 31.2% for good/very good; 26.3% for fair; 42.5% for poor/very poor while the right UCLP scored 8.3% for good/very good; 37.5% for fair; 54.2% for poor/very poor. The mean VAS for left and right UCLP were 53.4 (sd 22.5) and 44.6 (sd 17.1) respectively. Neither the GOSLON nor VAS differences reached statistical significance (both P = .08). CONCLUSIONS: From a clinical perspective right UCLP had worse dental arch relationship outcomes, however, these differences failed to reach statistical significance. Further studies using larger sample sizes are required to determine if cleft laterality is an important consideration when investigating UCLP dental arch outcomes.

Entire Dental Arch Mesial Movement after Extraction of Maxillary Right Central Incisor due to Root Fracture Treated with Temporary Anchorage Devices.

This case report describes a 19-year-old woman with skeletal Class I crowding and an unsalvageable maxillary right central incisor. She visited our clinic with the chief complaint of mobility of the maxillary right central incisor due to a traffic accident. After extraction of the maxillary right central incisor, the space was closed orthodontically. All the maxillary right teeth were moved mesially with an elastic chain attached to a palatal lever arm which was connected to palatal temporary anchorage devices (TADs). After orthodontic treatment had been completed, the maxillary right lateral incisor and peg-shaped left lateral incisor were restored with a porcelain laminate veneer. The maxillary right canine was morphologically reshaped and built up with composite resin. Consequently, esthetically ideal occlusion and functional lateral guidance with uncontacted molars were obtained. These results show that mesial movement of the entire dental arch with TADs is a useful orthodontic treatment option in patients in whom the maxillary central incisor has been extracted.

Association between shortened dental configurations and health outcomes: a scoping review.

This study mapped definitions of shortened dental configurations and health outcomes employed in association studies. A scoping review was conducted using the PubMed/Medline, Scopus, Web of Science, SciELO and Cochrane databases. Two trained researchers selected studies and extracted data. Studies that investigated the association between shortened dental configurations (exposure) and person-centered outcomes (general and oral health) related to health behavior (dietary patterns). Clinical outcomes were classified according to the International Classification of Functioning, Disability and Health and the International Classification of Diseases of the World Health Organization (WHO). Shortened dental configurations were defined as at least 20/21 teeth or the position of the teeth, including esthetics, dental occlusion and periodontal status (Eichner Index, Shortened Dental Arches, Functional Dentition Classification System, Posterior Occluding Pairs, Functional Tooth Units). The initial search resulted in 12,525 records in English, Portuguese and Spanish, 432 of which addressed the association of interest. General health (n = 203) and oral health (n = 201) were addressed in a similar number of studies. Most outcomes were related to general health (n = 184), the most frequent of which were endocrine, nutritional or metabolic diseases (n = 57) and mental functions (n = 26). Person-centered measures were addressed in 153 studies, most of which were about oral health and oral health-related quality of life (n = 62). Oral health outcomes were predominantly related to intake functions (n = 44) and diseases or disorders of the orofacial complex (n = 24). Dietary patterns (n = 43) and mortality (n = 38) were also studied. The cross-sectional design (n = 257) and non-probabilistic sampling (n = 218) were more frequent. The shortened dental configurations defined by the WHO were the most frequent in the studies (n = 206). The effects of shortened dental configurations have been investigated mainly in relation to endocrine, nutritional or metabolic diseases and measures of oral health-related quality of life. The findings point to a diversity of health outcomes assessed and substantial methodological variability.

Three-dimensional analysis of posterior tooth inclinations in transverse and sagittal relationships: A cross-sectional study.

OBJECTIVE: To compare tooth inclinations in different sagittal skeletal patterns and transverse maxillary relationships three-dimensionally. METHODS: A cross-sectional study carried out with 132 three-dimensional digital models in the complete permanent dentition divided into six groups (n=22); three groups with maxillary atresia: G1- skeletal class I, G2- skeletal class II and G3-skeletal class III; three groups without maxillary atresia: G4- skeletal class I; G5- skeletal class II and G6- skeletal class III. The comparison between the skeletal pattern was performed by the non-parametric tests of Kruskal Wallis and Dunn and between the groups by the non-parametric test of Mann Whitney. RESULTS: Subjects with skeletal class II and maxillary atresia had a greater lingual inclination of the maxillary teeth than those with class I and III; Subjects with skeletal class II without atresia had a less lingual inclination of the mandibular molars than the other classes (p<0.05). The maxillary premolars showed no variation in dental inclination with atresia, independent of the skeletal class in G1, G2, and G3 (p>0.05). The mandibular premolars showed that the groups without atresia G4, G5, and G6 presented no significant difference (p>0.05). Lower premolars in skeletal class III malocclusion individuals with atresia had a more negative inclination than the others. CONCLUSION: There is a difference in the inclination of posterior teeth between individuals with and without maxillary atresia and skeletal classes I, II, and III.

Customized planning of the visible maxillary arch width in harmony with interparopia width and smile width for female facial aesthetics.

BACKGROUND: The visible maxillary arch width (VAW) is an important aesthetic-determining feature. To date, there is no well-established methodology to determine the aesthetically optimal VAW in customized treatment planning. METHODS: In this study, the common traits of the dentofacial configuration were investigated in most attractive Asian and Caucasian female smiles. The smiling photo of a subject was digitally modified based on combined variations of VAW, smile width (SW), transverse facial dimensions (TFD), and vertical facial dimensions. These modified photos were assessed for aesthetics. The aesthetically essential parameters were identified, and their mathematic correlations and reference ranges were determined for different vertical facial patterns. Using the obtained results, a mathematic guidance was constructed for customized smile designing. The applicability of this guidance was tested in Asian females. RESULTS: The most attractive Asian and Caucasian female smiles have intraracial and interracial commonalities in the VAW-to-TFD ratios. The interparopia width (IPD) predominated over facial widths in determining well-matched VAW and SW. For optimal smile aesthetics, the VAW and SW were correlated as simulated by the formula 1.92 IPD ≤ VAW + 2.3 SW ≤ 2.17 IPD, plus the VAW-to-IPD ratio within 0.54 to 0.62 and the SW-to-IPD ratio within 0.61 to 0.71, ranges tailored to vertical facial patterns. This constitutes a mathematic guidance for customized planning of the aesthetically optimal VAW. This guidance was preliminarily validated to be applicable to Asian females. CONCLUSIONS: The VAW-to-TFD ratios were essential for Caucasian and Asian female smile aesthetics. The mathematic guidance could serve as a reference for customized smile designs for Asian females.

Prefabricated Trays Stock for Impression of Cleft lip and Palate Orthopedic Appliances: A Three-Dimensional Computational Analysis of Maxillary Jaws.

OBJECTIVE: This study aimed to propose digitally designed impression trays, for newborns with cleft lip and palate (CLP) defects, using the computer-assisted design and manufacturing (CAD/CAM) technique, based on measurements of width, length, and height made on processed and scanned plaster models. Thus, we will describe the different software and concepts that can be used for the design of these impression trays. DESIGN: A total of 59 plaster casts of newborn patients with CLP were collected and then scanned. After that, digital dental casts were three-dimensional (3D) evaluated, using precise anatomical landmarks. SETTING: The Maxillofacial Prosthodontics Team at the Dental consultation and treatment center in Rabat, Morocco. PATIENTS AND PARTICIPANTS: The study involved plaster casts of newborns with CLP, who had undergone presurgical neonatal treatment in the Maxillofacial Prosthodontics service in Rabat, Morocco. INTERVENTIONS: None. MAIN OUTCOME MEASURE(S): 3D evaluation of 59 scanned plaster casts of newborn patients with CLP. RESULTS: This work allowed us to obtain digital impression trays for each anatomical variation of orofacial clefts. These trays will limit the problems linked to conventional techniques for making neonatal orthopedic plates. We also emphasized the importance of a multidisciplinary approach involving several professionals in Morocco from various fields and specialties. CONCLUSION: This original technique is advantageous for the practitioner as well as for the patients and their parents. It allows for precise recording, better adaptation, time-saving, and parental comfort.

Correlation Theory of the Maxillary Central Incisor, Face and Dental Arch Shape in the Serbian Population.

Background and Objectives: According to the modified Williams theory, the shape of the maxillary central incisor corresponds to the shape of the maxillary alveolar ridge (dental arch) and the shape of the face. Moreover, the standards of beauty suggest that the center of the face of an individual with a full set of teeth should match the center of the maxillary and mandibular dental arches. The purpose of this study is to conduct a comparative cross-sectional study on the matching of the shape of the face, maxillary central incisor and maxillary dental arch as well as the matching of the midfacial line and dental arches in subjects with complete dentition. Materials and Methods: The study included 90 subjects of both sexes. The matching of the shape of the face and midfacial line, i.e., dental arches and maxillary incisors, was determined by analysing photographs, whereas the shape of the dental arch was determined by analysing plaster models. Results: No significant gender-related differences were found either in the shape of the maxillary central incisor that matched the shape of the maxillary dental arch (p = 0.349) or in the shape of the dental arch that matched the shape of the face (p = 0.697). However, a significant difference was noted in the shape of the teeth that matched the shape of the face (p = 0.043), which was more significantly impaired in men. In addition, the matching of the mid-face and the mid-dental arch was significantly greater in women (p = 0.016). Conclusions: The modified Williams theory was confirmed in most subjects, thus it can be considered a relevant guideline when determining the shape of teeth after their loss. The highest percentage of matching in both sexes was with the shape of the face and dental arch. There was no positive correlation between the middle of the maxillary and mandibular dental arch in most cases.

Relación entre la compresión maxilar y potencial impactación del canino superior: Scoping review

El canino maxilar permanente corresponde al segundo diente más frecuentemente impactado en el arco dental. La etiología de esta patología aún no está totalmente definida, sin embargo, investigadores plantean la deficiencia del ancho del hueso maxilar como una posible causa. Objetivo: Investigar la evidencia que asocia menores dimensiones transversales del maxilar a la ocurrencia de la impactación de caninos superiores y esclarecer la posible relación. Materiales y métodos: Se realizó una revisión sistemática exploratoria a partir de una búsqueda amplia de la literatura en bases de datos PubMed, Cochrane, EBSCO y Multibuscador UNAB. Los artículos fueron recopilados, identificados y filtrados según el diagrama de flujo de declaración PRISMA. Resultados: La búsqueda identificó 755 estudios, de los cuales 14 fueron incluidos. Los estudios varían en diseño, edad de estudio y métodos de diagnóstico. La mitad de los estudios reporta una asociación positiva entre compresión maxilar e impactación canina superior, mientras que la otra mitad una asociación negativa. Conclusiones: No hay evidencia suficiente para poder asociar compresión maxilar con impactación de caninos superiores. Estudios con métodos de diagnóstico rigurosos son necesarios para una mejor comprensión. No obstante, se enfatiza la importancia de un diagnóstico precoz, para garantizar mejores resultados y pronóstico más favorable.

The permanent maxillary canine is the second most frequently impacted tooth in the dental arch. The etiology of this disease is not completely defined, yet some researchers propose the deficiency of the width from the maxilla as a possible cause. Objective: To investigate available evidence correlating smaller transverse maxilla dimensions with the occurrence of potential impaction of upper canines and clarify the possible relation. Materials and methods: A systematic exploratory review was carried out based on comprehensive search of the literature in databases such as PubMed, Cochrane, EBSCO and UNAB multi search engine. The articles were compiled, identified and filtered systematically according to the PRISMA flow diagram. Results: Our search identified 755 studies, 14 of which were included. These studies vary in design, patients age, and methods for detection. Half of the studies show a positive correlation between maxillary compression and potential upper canine impaction, whereas the other half show a negative correlation. Conclusions: There is not enough evidence to link maxillary compression to upper canine impaction. Studies with rigorous diagnostic methods for detection are necessary for a better understanding of this relation. Nonetheless, the importance of early diagnosis must be emphasized to guarantee better results and a more favorable prognosis.

Influence of presurgical nasoalveolar molding (PNAM) treatment in maxillary dental arch width and nasolabial symmetry in patients with unilateral complete cleft lip and palate.

Unilateral complete cleft lip and palate (UCCLP) is one of the most severe clinical subphenotypes among nonsyndromic cleft lip and/or palate (NSCL/P), that complicates surgical repair operations. Presurgical nasoalveolar molding (PNAM) is a technique used to reshape the nose, lip and alveolar bone of infants with UCCLP before surgery (the modified Mohler rotation advancement cheiloplasty and two flap palatoplasty), with the potential to facilitate surgical repair. However, the effectiveness of PNAM treatment is still a matter of debate. In this paper, the 3Shape scanning system and 3dMD stereophotography were used to assess the short-term and long-term effects of PNAM treatment on the dental arch morphology and nasolabial features of patients with UCCLP, respectively. The findings indicated that PNAM treatment negatively affects both short-term and long-term dental arch shape compared to the treatment without PNAM, particularly in terms of limiting the transverse width of the maxillary canine-to-midline. Regarding the nasal and labial symmetry, PNAM improves the symmetry of the nasal alae in patients over 7 years old and the symmetry of the lip in patients under 7 years old. Moreover, UCCLP patients who received PNAM treatment exhibited a shorter and wider shape of the nostril on the cleft side compared to those without PNAM treatment. In clinical practice, the multidisciplinary team should carefully consider the advantages and disadvantages of the outcomes of PNAM treatment when treating infants with cleft lip and palate.

Orthodontic Implementation of Machine Learning Algorithms for Predicting Some Linear Dental Arch Measurements and Preventing Anterior Segment Malocclusion: A Prospective Study.

Background and Objectives: Orthodontics is a field that has seen significant advancements in recent years, with technology playing a crucial role in improving diagnosis and treatment planning. The study aimed to implement artificial intelligence to predict the arch width as a preventive measure to avoid future crowding in growing patients or even in adult patients seeking orthodontic treatment as a tool for orthodontic diagnosis. Materials and Methods: Four hundred and fifty intraoral scan (IOS) images were selected from orthodontic patients seeking treatment in private orthodontic centers. Real inter-canine, inter-premolar, and inter-molar widths were measured digitally. Two of the main machine learning models were used: the Python programming language and machine learning algorithms, implementing the data on k-nearest neighbor and linear regression. Results: After the dataset had been implemented on the two ML algorithms, linear regression and k-nearest neighbor, the evaluation metric shows that KNN gives better prediction accuracy than LR does. The resulting accuracy was around 99%. Conclusions: it is possible to leverage machine learning to enhance orthodontic diagnosis and treatment planning by predicting linear dental arch measurements and preventing anterior segment malocclusion.

Accuracy of models of partially edentulous arches obtained by three-dimensional printing: An in vitro study.

Aim: The aim of this study was to evaluate the accuracy of models of partially edentulous arches obtained by three-dimensional (3D) printing. Settings and Design: This was an in vitro study. Materials and Methods: Fifteen partially edentulous models were evaluated, using two methods of measuring dimensions: virtual, using the Standard Tessellation Language files of the models and software (control group), and physical, through printing the models and digital caliper (test group). For both methods, measurements were made regarding the dimensions of the teeth (width and length - buccal/lingual or palatal/occlusal) and distances between the teeth. Statistical Analysis Used: For the variable of linear measurements (width and length) and distances between teeth of the same hemiarch, the Wilcoxon test was used, while for the variable between opposite hemiarches, the paired t-test was used. Results: In the evaluation of the linear measurements, a significant difference was observed only when the width of the molar tooth was analyzed (P = 0.014). When the buccal length was measured, all teeth had linear measurements provided by the virtual method that was lower than the physical (P = 0.000), as well as the lingual/palatal length in incisors (P = 0.003) and molars (P = 0.009) and in total (P = 0.001). As for the analyses between teeth, no difference was identified between the measurements provided by the virtual method compared to the physical one. Conclusions: The 3D printer used to print partially edentulous models provided linear distortions in the teeth but without changes in the distances between teeth of the same hemiarch and between teeth of opposite hemiarches.

[Oral panorama reconstruction method based on pre-segmentation and Bezier function].

For patients with partial jaw defects, cysts and dental implants, doctors need to take panoramic X-ray films or manually draw dental arch lines to generate Panorama images in order to observe their complete dentition information during oral diagnosis. In order to solve the problems of additional burden for patients to take panoramic X-ray films and time-consuming issue for doctors to manually segment dental arch lines, this paper proposes an automatic panorama reconstruction method based on cone beam computerized tomography (CBCT). The V-network (VNet) is used to pre-segment the teeth and the background to generate the corresponding binary image, and then the Bezier curve is used to define the best dental arch curve to generate the oral panorama. In addition, this research also addressed the issues of mistakenly recognizing the teeth and jaws as dental arches, incomplete coverage of the dental arch area by the generated dental arch lines, and low robustness, providing intelligent methods for dental diagnosis and improve the work efficiency of doctors.

Assessment of early dental arch growth modification with removable maxillary expansion by cone-beam computed tomography and lateral cephalometric radiographs: a retrospective study.

BACKGROUND: This study evaluated the skeletal and dental changes of patients brought by early removable maxillary expansion (ERME) treatment to explore the clinical treatment effect of ERME on early dental arch growth modification. METHODS: Subject children aged 6-10 years with a maxillary transverse deficiency received ERME treatment, cone-beam computed tomography (CBCT) and lateral cephalometric radiographs were measured before and after treatment, and statistical differences in the measured items were evaluated with corresponding statistical methods to explore the skeletal and dental changes. RESULTS: After ERME treatment, there was a statistical increase in the maxillary basal bone arch width, nasal cavity width, maxillary alveolar bone arch width, and maxillary dental arch width. A buccal inclination of the maxillary alveolar bone and a buccal inclination and buccal movement in the alveolar bone of maxillary first molars were found. The maxillary skeletal expansion was statistically greater than the dental expansion. Increases in the mandibular alveolar bone arch width and dental arch width happened after treatment. A decrease in angle ANB and an increase in Ptm-A, U1-SN, U1-PP, L1-MP, and L6-MP were found after treatment. No statistical changes in the growth pattern-related measured items were observed. CONCLUSIONS: ERME could expand the maxillary basal bone arch width, nasal cavity width, maxillary alveolar bone arch width, and maxillary dental arch width. The maxillary skeletal expansion was greater than the dental expansion. Secondary increases in the mandibular alveolar bone and dental arch widths would happen after ERME. ERME would result in a mandibular advancement, a labial inclination of maxillary anterior teeth, and an increase of maxillary sagittal length, and would not change the patient's growth pattern. TRIAL REGISTRATION: This study was approved by the Institutional Review Board of the West China Hospital of Stomatology, Sichuan University. (WCHSIRB-D-2020-446).

Heritability of dental arches and occlusal characteristics: a systematic review and meta-analysis.

BACKGROUND AND OBJECTIVE: The genetic basis of dentoalveolar characteristics has been investigated by several studies, however, the findings are equivocal. The objective of this systematic review and meta-analysis was to evaluate the heritability of dental arches and occlusal parameters in different stages of human dentition. SEARCH METHODS: Electronic databases PubMed, Embase, Scopus, Web of Science, and Dentistry and Oral Science Source were searched up to August 2023 without the restriction of language or publication date. SELECTION CRITERIA: Empirical studies investigating the heritability of dentoalveolar parameters among twins and siblings were included in the review. DATA COLLECTION AND ANALYSIS: Study selection, data extraction, and risk of bias assessment were performed independently and in duplicate by two authors and a third author resolved conflicts if needed. Joanna Briggs Institute's critical appraisal tool was used to evaluate the risk of bias among studies and the certainty of evidence was assessed using the Grading of Recommendation, Assessment, Development, and Evaluation (GRADE) criteria. RESULTS: Twenty-eight studies were included in the systematic review, of which 15 studies reporting heritability coefficients in the permanent dentition stages were deemed suitable for the meta-analysis. Random-effects meta-analyses showed high heritability estimates for maxillary intermolar width (0.52), maxillary intercanine width (0.54), mandibular intermolar width (0.55), mandibular intercanine width (0.55), maxillary arch length (0.76), mandibular arch length (0.57), and palatal depth (0.56). The heritability estimates for the occlusal parameters varied considerably, with relatively moderate values for crossbite (0.46) and overbite (0.44) and low values for buccal segment relationship (0.32), overjet (0.22), and rotation and displacement of teeth (0.16). However, the certainty of evidence for most of the outcomes was low according to the GRADE criteria. CONCLUSIONS: Based on the available evidence, it can be concluded that the dental arch dimensions have a high heritability while the occlusal parameters demonstrate a moderate to low heritability. REGISTRATION: PROSPERO (CRD42022358442).

Assessment of dental arch forms in a sample of children.

In this study, we investigated dental arch forms in a representative sample of children with mixed dentition. Twenty-four pairs of study models, belonging to twenty-four youngsters (twelve boys and twelve girls aged 8 to 9 years) with acceptable occlusion, were scanned and assessed by Ortho analyzer software. Three transversal and three vertical measurements were acquired to evaluate the lengths and widths of dental arches, and the ratios between these measurements were standardized. Next, the mean standardized parameters were used to define the dental arch form. Unpaired t-tests were used to analyze gender differences for all measures. Subsequently, frequencies and percentages were determined for each arch shape in both jaws and genders, and Pearson's Chi-squared test was used to evaluate differences between genders. Males exhibited higher mean values for all measurements, but without statistical significance. The most prevalent dental arch was the mid form (83.3%) for both jaws and genders.

A Cross-Sectional Study of the Dental Arch Relationship and Palatal Morphology after Cleft Surgery in Italian Children with Unilateral Cleft and Lip Palate.

Dental arch relationships (DARs) and palatal morphology (PM) were evaluated in in non-syndromic complete unilateral cleft lip and palate (UCLP) Italian patients after surgery. Pre- and postnatal factors affecting the results were investigated. Sixty-six children with UCLP (40 boys and 26 girls, with a mean age of 10.1 ± 2.9 years), predominantly Caucasian (77%), were consecutively enrolled in this cross-sectional study. Twenty children had received a one-stage protocol consisting of an early periosteal palate surgical repair and lip closure and forty-six were submitted to a staged surgical protocol with delayed palate repair (DPR). A single clinician collected data on their medical history and carried out a dental examination. The DAR and PM were graded on dental casts according to the Eurocran index and dichotomised as favourable and unfavourable based on the treatment outcome. Multiple logistic regression analyses demonstrated that female sex (OR = 6.08, 95% CI: 1.47-25.23, p = 0.013), DPR (OR = 4.77, 95% CI: 1.14-19.93, p = 0.032) and the use of a neonatal plate (OR = 4.68, 95% CI: 1.27-17.16, p = 0.020) increased the odds of having favourable DAR, while only DPR (OR = 9.76, 95% CI: 2.40-39.71, p = 0.001) was significantly associated with a favourable PM. Based on these findings, only DPR had a significantly favourable effect on both DAR and DM in Italian children with complete UCLP.

Gender and age effects on dental and palatal arch dimensions among full siblings.

PURPOSE: This study was conducted to investigate the dental and palatal arch dimensions of male and female siblings in relation to gender and age, using three-dimensional (3D) digital casts. METHODS: This study involved 54 subjects (27 pairs) of male-female siblings aged 15 to 45 years. Dental casts were digitized and analyzed for tooth size (TS), arch width (AW), arch length (AL), arch length discrepancy (ALD), and palatal arch dimensions (PAD). The data obtained were subjected to t-tests, and the palatal curvature (PC) was modeled using a fourth-order polynomial. RESULTS: Significant differences (P < 0.05) between the sexes were found in the mesiodistal TS, particularly in all canines, as well as 16, 36, 46, and 41. Maxillary AW and AL were also significantly (P < 0.05) influenced by sexes. Most arch parameters were more prominent in male siblings, and the effect of age on PC differed between the sexes. In addition, the PC of adolescent females was mostly superimposed on adult females relative to males. CONCLUSION: Among siblings, males were found to have significantly larger dental arch dimensions than females. Furthermore, PC showed some differences between the sexes in both the frontal and sagittal planes.

Effects of two flap palatoplasty versus furlow palatoplasty with buccal myomucosal flap on maxillary arch dimensions in patients with cleft palate at the primary dentition stage: a cohort study.

OBJECTIVE: The objective of this study was to evaluate the effect of two flap palatoplasty (TFP) versus Furlow palatoplasty with buccal myomucosal flap (FPBF) on maxillary arch dimensions in children at the primary dentition stage with cleft palate, in comparison to matching subjects without any craniofacial anomalies. MATERIAL AND METHODS: This study included 28 subjects with an age range of 5-6 years; 10 non-cleft subjects were included in the control group, 9 patients treated with TFP, and 9 patients treated with FPBF. For the included patients, the maxillary models were scanned using a desktop scanner to produce virtual models, and the maxillary dimension measurements were virtually completed. The produced measurements were compared between the 3 groups. Maxillary models of the 28 participants were evaluated. RESULTS: Statistically insignificant differences were detected between the 3 groups for arch symmetry measurements. Differences were detected in the inter-canine width between the 2 surgical groups and non-cleft group. Both arch length and posterior palatal depth significantly differ while comparing the TFP to the control group, with no differences between FPBF and the non-cleft group. CONCLUSION: Furlow palatoplasty with buccal myomucosal flap might be considered a better surgical option than two flap palatoplasty for patients with cleft palate while evaluating maxillary arch dimensions at the primary dentition stage as a surgical outcome. CLINICAL RELEVANCE: This study gives insight into the surgical technique that has limited effect on the maxillary growth and dental arch dimension. Therefore, it decreases the need for orthodontic treatment and orthognathic surgery. TRIAL REGISTRATION: clinicaltrials.gov ( NCT05405738 ).

Effects of headgear timing on dental arch changes from 7 to 18 years of age: a follow-up study.

BACKGROUND: Dental arch effects after cervical headgear (CHG) treatment have been researched from several different perspectives. However, the long-term effects of CHG timing are still unknown. OBJECTIVES: To analyse the long-term effects of CHG timing on dental arches. MATERIAL AND METHODS: A total of 67 children with Angle Class II malocclusion comprised the study group in this trial. The participants were randomized into two equal-sized groups. In the early group (EG, n = 33), treatment was started after the eruption of the first upper molars. In the later-timed group (LG, n = 34), treatment was started 18 months later compared with the early group. Long-term effects were measured from dental casts taken at five time points between 7 and 18 years of age. RESULTS: The total maxillary dental arch length was achieved earlier, the gained length persisted better in the long term, and significantly more space was achieved in EG compared with LG (P = .048). The intermolar width in the maxillary dental arch was more stable and was reached earlier in EG compared with LG (P = .002). The results showed that in terms of total mandibular arch length increases, EG males benefited the most and LG females the least from CHG treatment (P = .031). CONCLUSIONS: Both genders benefited from earlier CHG treatment. The maxillary dental arches remained longer, and the final width was gained earlier in EG compared with LG.

Osteonecrose dos maxilares relacionada ao uso demedicamentos: características patológicas, diagnóstico,prevenção e estratégias terapêuticas / Medication-related osteonecrosis of the jaws: pathological characteristics, diagnosis, prevention and therapeutic strategies

Objetivo: Este trabalho tem como propósito fornecer uma análise abrangente das características clínicas, etiológicas, radiográficas e histopatológicas da osteonecrose dos maxilares relacionada ao uso de medicamentos, além de abordar os métodos de diagnóstico, prevenção e estratégias terapêuticas. Materiais e métodos: foi realizada uma busca por artigos científicos publicados no período de 2015 a 2023, utilizando as bases de dados Scientific Electronic Library Online (SciELO), US National Library of Medicine (PubMed) e ScienceDirect. Conclusão: Embora infrequente, há um considerável potencial de ocorrência de osteonecrose dos maxilares em pacientes submetidos a terapia prolongada com medicamentos antirreabsortivos e antiangiogênicos, especialmente quando não são adotadas medidas preventivas adequadas. A implementação de práticas preventivas, a vigilância das condições bucais e a colaboração de uma equipe multidisciplinar são fundamentais para reduzir os riscos associados a essa condição patológica.(AU)

Objective: This work aims to provide a comprehensive analysis of the clinical, etiological, radiographic and histopathological characteristics of Medication-Related Jaw Osteonecrosis, in addition to addressing diagnostic methods, prevention and therapeutic strategies. Materials and methods: A search was carried out for scientific articles published between 2015 and 2023, using the Scientific Electronic Library Online (SciELO), US National Library of Medicine (PubMed) and ScienceDirect databases. Conclusion: Although infrequent, there is a considerable potential for osteonecrosis of the jaw to occur in patients undergoing prolonged therapy with antiresorptive and antiangiogenic medications, especially when adequate preventive measures are not adopted. The implementation of preventive practices, surveillance of oral conditions and the collaboration of a multidisciplinary team are essential to reduce the risks associated with this pathological condition.(AU)